All Products & Instrument Catalog

Showing 9 / 9 matching products

Sort

MEGGERTTRU3
Megger TTRU3 Three-Phase Transformer Turns Ratio Tester | Simultaneous three-phase excitation, step-up measurement up to 250 V, ±0.05%, 7-inch touchscreen
- Ratio 0.8–50000 (step-down); ±0.05% for 0.8–1000 at 25–48 V
- Simultaneous three-phase excitation; step-up up to 250 V on primary (ADV: 125 V)
- 7-inch touchscreen; IP51; 6.5 kg; USB export
Price on request
Project Quote
MEGGERTTRU1
Megger TTRU1 Handheld Transformer Turns Ratio Tester | Single-phase measurement, up to 62.5 V induced, ±0.05%, IP54, approx. 1 kg
- Single-phase step-down measurement; ratio 0.8–50000; ±0.05% for 0.8–1000 at 25–50 V
- Induced voltage BASIC 37.5 V, ADV 62.5 V; ADV adds short/open-circuit Go/No Go
- 6 × AA (USB-C rechargeable NiMH included) approx. 1000 tests; IP54; approx. 1 kg
Price on request
Project Quote
MEGGERTDR500/3
Megger TDR500/3 Handheld Time Domain Reflectometer (TDR) | Metallic cable fault location, up to 5 km, 0.1 m resolution, 4 impedances, IP54
- Range 10 m–5 km in 7 steps; min. resolution 0.1 m
- Output impedance 25/50/75/100 Ω; velocity factor 0.2–0.99; 2 ns pulse
- 5 × AA approx. 14 h; IP54; 0.6 kg
Price on request
Project Quote
MEGGEROTS PB/OTS AF
Megger OTS PB/OTS AF Insulating Oil Breakdown Tester | Fully automatic, 60/80/100 kV, built-in IEC 60156, ASTM D877/D1816 and other standards
- OTS60PB/OTS80PB: 60/80 kV, mains and NiMH battery, 16.8–20.8 kg
- OTS60AF/80AF/100AF: up to 100 kV, barcode scanner and alphanumeric keypad, 30 kg
- Voltage resolution 0.1 kV, ±1% ±2 dgt; 400 ml vessel; built-in printer
Price on request
Project Quote
MEGGERMIT515
Megger MIT515/MIT1025 High-Voltage Insulation Resistance Tester (discontinued by the manufacturer; current models MIT515/2, MIT1025/2) | 5 kV/10 kV, up to 20 TΩ, CAT IV 600 V
- MIT515: 5 kV, 10 TΩ, IR, IR(t), DAR, PI, no memory
- MIT1025: 10 kV, 20 TΩ, adds SV, DD, Ramp, memory and USB
- Discontinued; current models MIT515/2 (Essential), MIT1025/2 (Advanced)
Price on request
Project Quote
MEGGEREGIL200
Megger EGIL200 Circuit Breaker Analyzer | 3/6/12 main and resistor contact channels, 3 auxiliary contact channels, 40 kHz sampling, DualGround, IP67
- 3, 6 or 12 main/resistor contact channels; 3 auxiliary contact channels; 40 kHz sampling
- Control outputs Close, Trip 1, Trip 2; coil current ±80 A; PIR 10 Ω–10 kΩ
- 7-inch touchscreen; 12 kg; IP67 (lid closed); optional DCM200 both-sides grounding
Price on request
Project Quote
MEGGERDLRO10HD
Megger DLRO10HD 10 A Digital Low Resistance Ohmmeter | 0.1 μΩ resolution, 5 measurement modes, 600 V accidental connection without blowing fuses, IP65 (lid closed)
- 100 μA–10 A; 0.1 μΩ resolution on 0–2.5 mΩ range; ±0.2% ±0.2 μΩ
- 5 modes: bidirectional, unidirectional, auto, continuous, inductive; high-power 10 A up to 250 mΩ
- 600 V accidental connection without blowing fuses; IP65 (lid closed) / IP54 (battery operation); 6.7 kg
Price on request
Project Quote
MEGGERDELTA4000
Megger DELTA4000 12 kV Dielectric Loss (Power Factor/tan δ) Test System | 1–505 Hz variable frequency, Individual Temperature Correction (ITC), 3.6 kVA
- 0–12 kV; 3.6 kVA; 300 mA (4 minutes), 100 mA continuous
- Frequency 1–505 Hz (250 V), 15–400 Hz (4 kV), 45–70 Hz (12 kV)
- PF/DF ±(0.5% of reading + 0.02%); capacitance ±(0.5% + 0.1 pF); ITC temperature correction
Price on request
Project Quote
MEGGERSVERKER 900
Megger SVERKER 900 Three-Phase Relay and Substation Test System | 3 current + 4 voltage sources, single-phase mode 105 A / 900 V, DC and 10–600 Hz, operation without a PC
- 3 × 35 A (10 s ON / 20 s OFF), 3 × 20 A continuous; 4 × 300 V
- Single-phase mode: current in parallel 105 A, voltage in series 900 V; DC and 10–600 Hz
- 5.7-inch touch screen; 6 binary inputs; 15.2 kg
Price on request
Project Quote